PSMove-DSU 3.1 adds a window, and now pairs the Navigation controller too
The PlayStation Move motion-control server for Dolphin, Cemu and other emulators now has a built-in GUI, ARM64 builds and Navigation controller pairing.
AI-drafted from 3 sources. This story was written with AI from the outside reporting listed under Sources, and checked by automated tools before it went up. The originals have the full detail.
If you want motion controls in an emulator and do not own the original hardware, a used PlayStation Move is about the cheapest way in. PSMove-DSU is the bit of software that makes that work. It reads a Move over Bluetooth and serves its gyro, accelerometer and buttons using the DSU (Cemuhook) protocol, which Dolphin, Cemu and a number of other emulators already know how to listen to.
A window instead of a console
Version 3.0 on 12 November was the big one: the program now opens a proper window instead of leaving you with a console and a config file. There is a controllers tab with live graphs for each pad, plus battery, report rate and how old the latest data is. Identify lights up and rumbles a controller so you can tell which slot is which. Buttons and motion axes can be remapped and inverted, with live bars showing what the emulator actually receives. A diagnostics button copies a report you can paste into a bug.
That release also fixed a few things that sound small until they happen to you. Buttons that did nothing or came out swapped in Dolphin, controllers that got stuck after being switched off, and some input lag and discovery problems that stopped emulators finding the server at all.
Navigation controller and ARM builds
The 3.1.0 follow-up, out on 16 November, adds pairing for the Navigation controller. You can pair one over USB with --pair-nav or with a new button on the Pairing tab. On Linux, --linux-setup now installs a udev rule so that works without root. Pairing a regular Move on Linux still needs sudo, because it has to register the pad with BlueZ. The project also now ships Windows ARM64 and Linux ARM64 builds next to the x64 ones and the Intel and Apple Silicon Mac builds.
One honest caveat from the developer: it is tested with Dolphin, and the README says other emulators should work because they follow the same protocol, but the author has not tried them. Eden, Azahar, RPCS3 and PCSX2 are listed as candidates. If one does not work for you, the project asks for an issue with the diagnostics report and the emulator version. Rumble is supported by the protocol extension, though Dolphin, Cemu, Azahar and Eden do not currently send it.
Getting it running
Setup is short. Pair the controller, start PSMove-DSU, then point your emulator's DSU client at 127.0.0.1 on port 26760.